RETRO Innovations

Archive for October, 2010

uIEC/SD Reorder

by on Oct.19, 2010, under Hardware Design, Storefront



Sales at the recent ECCC show depleted stock of the uIEC/SD units.  Normally, I order more stock when quantities get below 20 or so units, but I was not paying as much attention to the stock level while relocating.  Sadly, I ran out, but I have ordered 100 more units and they should be here in a few weeks.

Comments Off on uIEC/SD Reorder more...

Announcing ZoomFloppy

by on Oct.02, 2010, under Hardware Design

It’s a sad fact that, as technology marches forward, it affects even retro enthusiasts. For years, Commodore users have archived their personal disk collections using the ubiquitous “Star Commander” and some variant of the venerable “X-1541” adapter to connect IEC-based disk drives to the PC. As parallel ports have changed through the years, designers have adapted the X-1541 design to keep up. But, with the advent of the USB port, parallel ports have all but disappeared from the marketplace. The inherent design of the X1541-style cables cannot overcome the loss of a connection to the computer!

A few years ago, Till Harbaum created the XU1541 project, designed to connect via a USB port on newer machines. However, the project was eventually cancelled, with development efforts stalled.

ZoomFloppy Prototype (Courtesy Glenn Holmer)

ZoomFloppy Prototype (Courtesy Glenn Holmer)

Nate Lawson decided to do something about that. Taking a cue from the XU1541 design and identifying its shortcomings, Nate started working on a new implementation using a hardware USB-based Atmel AVR microcontroller via a Bumble B Mini USB Development Board. I got involved in March, when Nate asked if I would be interested in helping with the PCB design. Though initial ideas were to simply build a base for the Bumble-B, cost analysis led us to simply design the Bumble B functionality into a specific-use board.

Nate Lawson Presenting "ZoomFloppy" Details (Courtesy Glenn Holmer)

Nate Lawson Presenting "ZoomFloppy" Details (Courtesy Glenn Holmer)

Though my recent relocation hindered the timeline, I am excited to now announce the upcoming sales of the ZoomFloppy Commodore Drive USB Adapter.  The schematic is finalized, board design is nearly complete.  Nate presented details on the device at the recent Chicago ECCC show, outlining the many features of the new device on his web site, including his ECCC presentation.

Comments Off on Announcing ZoomFloppy : more...

Visit our friends!

A few highly recommended friends...