While replenishing stock of uIEC/SD daughtercards, I decided to improve the design a bit. Hopefully, this version will eliminate the need to offer the original daughtercard option.
- Buttons now on side of unit, for easier access. Buttons can now be used on C128D/C128DCR when installed.
- Operational Mini-USB connector. If desired, power with a small Mini-USB phone charger
- Complete 7805-based linear regulator section available for hobbyists. Parts are not present on the board, but should be trivial to source (2 caps and an LM7805)
- Oversized holes at front of board to allow PCB standoff usage. When powered via MiniUSB, standoffs can be used to level the PCB.
The new daughtercard works with all uIEC/SD versions (3.0,3.1, and 3.2). Stock will be arriving soon. Production boards will have sorter switch posts, for some reason, I accidentally ordered taller ones for the prototype.